The Vision...
- Purpose Built for Performance
- OEM or better quality, fit, and finish.
- No compromises, shortcuts or hack jobs. No exceptions.
- Part 1: Exterior
- Part 2: Interior
- Part 3: Performance
2 Thousand 22 | Bronco Raptor Build | Tye
- Thread starter Tye
- Start date
The Vision...
OP
- Thread Starter
- Thread starter
- #2
The Canvas...
Before diving into Part 1, just wanted to share the blank canvas I started with. 2022 Bronco Raptor purchased new to my spec.
The Original Spec...
Colors: Shadow Black / Onyx MGV
Options:
-Raptor Series
-Lux Package
-Adaptive Cruise Control
-AM/FM 10 Speakers
-Heated Steering Wheel
-Wireless Charing Pad
-17" BLK FRGD Beadlock CPBL WHLS
-Code Orange Seatbelt
-Interior Carbon Fiber Pack
Before diving into Part 1, just wanted to share the blank canvas I started with. 2022 Bronco Raptor purchased new to my spec.
The Original Spec...
Colors: Shadow Black / Onyx MGV
Options:
-Raptor Series
-Lux Package
-Adaptive Cruise Control
-AM/FM 10 Speakers
-Heated Steering Wheel
-Wireless Charing Pad
-17" BLK FRGD Beadlock CPBL WHLS
-Code Orange Seatbelt
-Interior Carbon Fiber Pack
OP
- Thread Starter
- Thread starter
- #3
Part 1: Exterior
Parts:
The first step was to start to dismantle the vehicle.
[placeholder more pics coming]
Wiring
Given the loads the Baja Designs lights pull, I wanted wiring that aired on the side of overkill. John at SPV was excellent to work with. For the 6 LP4 that are going on the front bumper, the harness for it is dual 10 gauge wires feeding 3 LP4’s each parallel to each other. 10 gauge is good for up to 30 amps. So there is plenty of cushion on that main line. The individual lines to each light are 14 gauge. While it may be overkill, I also wanted to secure the wiring along the whole length and keep it neatly tucked out of the way.
[To Be Continued]
Parts:
- Expedition One Rear Bumper and Tire Swing Carrier System
- RTR Evo6 17x9 ET18 Wheels in Satin Black
- BFG KO2 39" Tires
- RPG 3rd Brake Light Extension Plate
- Baja Designs LP4 with Links (6)
- Baja Designs LP4 Ditch Lights
- Baja Designs Squadron Sport -Work/Scene/Amber
- Diode Dynamics SSC2 Pro Fog Lights - Amber
- Diode Dynamics SSC2 Pro Combo Lights - Clear
- SPV Custom Wiring Harnesses for all lights
The first step was to start to dismantle the vehicle.
[placeholder more pics coming]
Wiring
Given the loads the Baja Designs lights pull, I wanted wiring that aired on the side of overkill. John at SPV was excellent to work with. For the 6 LP4 that are going on the front bumper, the harness for it is dual 10 gauge wires feeding 3 LP4’s each parallel to each other. 10 gauge is good for up to 30 amps. So there is plenty of cushion on that main line. The individual lines to each light are 14 gauge. While it may be overkill, I also wanted to secure the wiring along the whole length and keep it neatly tucked out of the way.
[To Be Continued]
Top Member Reactions
-
34 -
30 -
30 -
26 -
19 -
18 -
16 -
14 -
13 -
12 -
12 -
11 -
11 -
10 -
9
Bronco Raptor Forum Photos
Bronco Raptor Forum Photos
