New Member - Black Raptor - Looking for Mods

[TX Braptor]

Hi Y’all, got my Raptor last week and didn’t realize there are two Bronco Raptor forums. This one appears to offer way more content, so looking forward to seeing all the mods/upgrades members have been installing.

These are bad ass of the lot, but can always be made better….

First upgrade will be a small 1-2” level, likely the RPG collars, unless anyone has a better solution please share. Mine sits 3/4” lower in the front, so rake is not as noticible as my Badlands was.

Then tire/wheel combos in the 38-40” range.

 

[Tye]

welcome to the forum. lots of members here have modded their raptors already so im sure you will find great ideas. Here is mine:
rtr evo 6 wheels
39 ko2s
ceramic tint
windshield protection film
focal speaker upgrade

need to install still:
baja designs lp4 (6 on front bumper, 2 on a pillar)
diode dynamics yellow and white fogs
RPG lift collars (1.5 front, 2.25 rear)

 

[TurboS]

Hi Y’all, got my Raptor last week and didn’t realize there are two Bronco Raptor forums. This one appears to offer way more content, so looking forward to seeing all the mods/upgrades members have been installing.

These are bad ass of the lot, but can always be made better….

First upgrade will be a small 1-2” level, likely the RPG collars, unless anyone has a better solution please share. Mine sits 3/4” lower in the front, so rake is not as noticible as my Badlands was.

Then tire/wheel combos in the 38-40” range.

Welcome to the BroncoRaptor.com! This is your forum, we have a plethora of Bronco Raptor specific information on this site. Check out our supporting vendors forum, Foutz Motorsports who is continually developing new custom suspension components including lift collars.

 

[TX Braptor]

welcome to the forum. lots of members here have modded their raptors already so im sure you will find great ideas. Here is mine:
rtr evo 6 wheels
39 ko2s
ceramic tint
windshield protection film
focal speaker upgrade

need to install still:
baja designs lp4 (6 on front bumper, 2 on a pillar)
diode dynamics yellow and white fogs
RPG lift collars (1.5 front, 2.25 rear)

Hey Tye, thanks for sharing and your ride looks awesome!!

Just to confirm, those 39” BFGs fit with factory suspension? Any rub at full lock?

What is the offset and width of your RTR wheels?

Sorry for all the questions, but last one, the RPG collars you plan to install, you said 1.5” front and 2.25” rear? I was thinking it would be the other way around since these Raptors sit about an 1” raked in the front, so would do 2.25” front and 1.5” for the rear.
You think the stock UCAs will work or have to upgrade those as well?

Thanks in advance for the info!

 

[Tye]

Hey Tye, thanks for sharing and your ride looks awesome!!

Just to confirm, those 39” BFGs fit with factory suspension? Any rub at full lock?

What is the offset and width of your RTR wheels?

Sorry for all the questions, but last one, the RPG collars you plan to install, you said 1.5” front and 2.25” rear? I was thinking it would be the other way around since these Raptors sit about an 1” raked in the front, so would do 2.25” front and 1.5” for the rear.
You think the stock UCAs will work or have to upgrade those as well?

Thanks in advance for the info!

yes they fit on factory suspension but will rub on full steering lock. im pretty sure they would rub on full stuff too.

The wheels are 17x9 ET18 and weigh 22lbs.

I want to retain the factory rake hence why im doing 1.5 front and 2.25 rear. The rear speings are softer than the front hence why it needs more lift to retain the rake.

Im going to also upgrade the uca and rear arms but it is not necessary for the lift collars.

 

[TX Braptor]

yes they fit on factory suspension but will rub on full steering lock. im pretty sure they would rub on full stuff too.

The wheels are 17x9 ET18 and weigh 22lbs.

I want to retain the factory rake hence why im doing 1.5 front and 2.25 rear. The rear speings are softer than the front hence why it needs more lift to retain the rake.

Im going to also upgrade the uca and rear arms but it is not necessary for the lift collars.

Thanks for the info
Those wheels super light weight, I’ll have to check out!

Makes sense if wanting to keep the rake, I think I’ll go with 2.25” front and 1.5” rear to level it out. Good to know the $1500 UCAs don’t have to be added. Gonna contact RPG this week to get these ordered. Will post after, thanks!