Air / Oil Separator Update

[KWStan]

Hello all... I justreceived an email from Ford Performance Warranty advising that a new Air/Oil Separator has been created for our vehicles. This is due to the hood rubbing issue with the model that they sold until early this year. They advised that they will be sending replacement units in October to those that purchased the older units. If you have not done it yet, contact them at: fwrnty@ford.com and verify purchase & address so they have correct shipping info.

 

[TurboS]

Hello all... I justreceived an email from Ford Performance Warranty advising that a new Air/Oil Separator has been created for our vehicles. This is due to the hood rubbing issue with the model that they sold until early this year. They advised that they will be sending replacement units in October to those that purchased the older units. If you have not done it yet, contact them at: fwrnty@ford.com and verify purchase & address so they have correct shipping info.

Welcome to BroncoRaptor.com! This is really Good News, thank you for posting. Can you please also copy your post over to the thread below as we have large number of members following that thread for updates.

Ford Performance Air/Oil Separator DIY installation

Installed the Ford Performance Air/Oil Separator SKU: M6766BW30 and removed my previously installed UPR single valve catch can. If I would have had the UPR dual valve I don't think I would have seen the value in changing to this Ford Performance unit...

www.broncoraptor.com

 

[Uncle Bob & Aunt Mary]

Hello all... I justreceived an email from Ford Performance Warranty advising that a new Air/Oil Separator has been created for our vehicles. This is due to the hood rubbing issue with the model that they sold until early this year. They advised that they will be sending replacement units in October to those that purchased the older units. If you have not done it yet, contact them at: fwrnty@ford.com and verify purchase & address so they have correct shipping info.

Did they tell you what the new SKU is? I can't find anything saying the part has been updated.

Cheers

 

[KWStan]

No - no specific info on part numbers... Here's exactly what they said:

"We are anticipating a revised kit being released with an ETA of October of this year.
Once the new kit is available, I will send you all of the revised components for your kit to improve the hood clearance."

 

[S & P]

Hello all... I justreceived an email from Ford Performance Warranty advising that a new Air/Oil Separator has been created for our vehicles. This is due to the hood rubbing issue with the model that they sold until early this year. They advised that they will be sending replacement units in October to those that purchased the older units. If you have not done it yet, contact them at: fwrnty@ford.com and verify purchase & address so they have correct shipping info.

Question, looking at this kit, I don't see any actual oil catch can that you empty periodically. Where does the oil go?

 

[KWStan]

I'm not sure what product you are looking at, but the Ford Performance version I'm referring to has 2 catch cans...

 

[S & P]

I'm not sure what product you are looking at, but the Ford Performance version I'm referring to has 2 catch cans...

Ford Racing Performance FRPP
Manufacturer Part # M-6766-BW30. Looks like two sealed units.

 

[KWStan]

Ford Racing Performance FRPP
Manufacturer Part # M-6766-BW30. Looks like two sealed units.
View attachment 16780

That's a top-down image of the unit. The lids on the reservoirs are removable (silver hex bolts) and the bottom portion slides off of the mounting bracket.

 

[S & P]

That's a top-down image of the unit. The lids on the reservoirs are removable (silver hex bolts) and the bottom portion slides off of the mounting bracket.

Okay, got it, thank you.

 

[TurboS]

Ford Racing Performance FRPP
Manufacturer Part # M-6766-BW30. Looks like two sealed units.
View attachment 16780

You will want to wait until the revised kit is available from Ford Performance for our Bronco Raptor's. See below thread for details

Ford Performance Air/Oil Separator DIY installation

Installed the Ford Performance Air/Oil Separator SKU: M6766BW30 and removed my previously installed UPR single valve catch can. If I would have had the UPR dual valve I don't think I would have seen the value in changing to this Ford Performance unit...

www.broncoraptor.com