Bronco Raptor Stock Wheel & Tire Specs

[Dragoon]

Not bad at all! It might be tough to find another 37-inch tire that weighs less than that.

 

[CVSJR]

These are load range C 6ply tires, load range D are 8ply and weigh about 69lbs. Don't really need D for the Raptor, never have the need for 3550lbs /tire

 

[TurboS]

Our Bronco Raptor Forged Beadlock-capable OEM wheel weights about 36.4 lbs. 17x8.5 with +34 positive offset.

Weighted the spare tire/wheel combo on a bathroom scale, maybe not the most accurate so I tried a dozen times. highest was 102.2, lowest 101.4, most common was 101.6 reading.
So, if we use 101.6
minus 2.25 oz wheel weights, -.14
minus 3 oz for motorcraft TPS, -.187
minus 64.8 lbs for the KO2 according to BFGoodrich site.
Totals to approximately 36.4 lbs., a little lighter than I expected.

 

[Dragoon]

Our Bronco Raptor Forged Beadlock OEM wheel weights about 36.4 lbs. 17x8.5 with +34 positive offset.

View attachment 4574
Weighted the spare tire/wheel combo on a bathroom scale, maybe not the most accurate so I tried a dozen times. highest was 102.2, lowest 101.4, most common was 101.6 reading.
So, if we use 101.6
minus 2.25 oz wheel weights, -.14
minus 3 oz for motorcraft TPS, -.187
minus 64.8 lbs for the KO2 according to BFGoodrich site.
Totals to approximately 36.4 lbs., a little lighter than I expected.

That's a lot more offset than I thought it would be. So if my math is right then 0 offset aftermarket wheels will poke out about 1.3-inches more per side than stock wheels?

 

[Ironmike]

That's a lot more offset than I thought it would be. So if my math is right then 0 offset aftermarket wheels will poke out about 1.3-inches more per side than stock wheels?

Yes

 

[Nicfitr1]

So im looking to buy the beadlock rings for my stock wheels....but also for a street set ....im looking at the icon compression wheel in titanium....17x8.5 6on5.5...my question is i only want to go out a liitle bit more than stock...i saw the 0mm offset moves it out 1.3 inches....so im terrible at math...so i would assume the 25 mm offset would only move the wheel out about 1/2 inch or so?

 

[Turbo yzel]

Found this at dealer looking for my beadlock rings
Hope it helps someone