🛠️ Member Build Velocity Blue Bronco Raptor on RPG perch collar lift, 38's and painted flares

Member Build
M_Braptor

M_Braptor

New member
Mar 9, 2023
15
Gallery
1
30
Texas
Current Ride
Bronco Raptor
Current Ride #2
Ram 1500
Hi, I'm a new member and was invited over to share my build after a member saw it on another forum. Below are the details.
Build list.

RPG Perch Collar Lift - 1.5" front / 2.25" rear
38x13.50x17 TrailGrapplers
TIS 556 Wheels -12 offset
Rock Slide Engineering Steps
Body Guard Front and Rear Bumpers
20 inch Rigid light Bar; 4 Rigid ignites, 10k Smittybuilt Bumper
KC Flexera 4 Pillar lights
Monster Hooks Inc Swivel Hooks
Complete B&O replacement with kicker subs, speakers, amps and an axxess DSP
IAG Interior Lights
Tuffy (Ford) Deluxe Cargo Lid
Ford Tube Doors
JB4
Pedal Commander
UPR Catch Can
a few Vinyl accents

Next in line:
JTops Bimini
Intercooler
Down Pipes
Wait on a full tune!
Braptor.jpg
IMG-4603.jpg
IMG-4371.jpg
IMG-4628.JPG
 
M_Braptor said:
Hi, I'm a new member and was invited over to share my build after a member saw it on another forum. Below are the details.
Build list.

RPG Perch Collar Lift - 1.5" front / 2.25" rear
38x13.50x17 TrailGrapplers
TIS 556 Wheels -12 offset
Rock Slide Engineering Steps
Body Guard Front and Rear Bumpers
20 inch Rigid light Bar; 4 Rigid ignites, 10k Smittybuilt Bumper
KC Flexera 4 Pillar lights
Monster Hooks Inc Swivel Hooks
Complete B&O replacement with kicker subs, speakers, amps and an axxess DSP
IAG Interior Lights
Tuffy (Ford) Deluxe Cargo Lid
Ford Tube Doors
JB4
Pedal Commander
UPR Catch Can
a few Vinyl accents

Next in line:
JTops Bimini
Intercooler
Down Pipes
Wait on a full tune!View attachment 6644View attachment 6645View attachment 6646View attachment 6647
Click to expand...
Welcome to BroncoRaptor.com and thank you for sharing your Bronco Raptor build. 🍻 The pics look Amazing and as with all Bronco Raptors, I'm sure in person is even better! :cool:

You'll have to post your favorite photo over in our monthly Bronco Raptor photo contest.
www.broncoraptor.com

🏆 BROTM - March 2023 - Bronco Raptor of the Month starts now!

It's time for our March 2023 Bronco Raptor of the Month photo contest! Now is the perfect time to show off your Braptor and gain some forum notoriety as a BROTM winner. The winner will receive a one-of-a-kind Bronco Raptor Forum Hat, BROTM badge, and will be listed on the Bronco Raptor Wall of...
www.broncoraptor.com www.broncoraptor.com
 
M_Braptor said:
Hi, I'm a new member and was invited over to share my build after a member saw it on another forum. Below are the details.
Build list.

RPG Perch Collar Lift - 1.5" front / 2.25" rear
38x13.50x17 TrailGrapplers
TIS 556 Wheels -12 offset
Rock Slide Engineering Steps
Body Guard Front and Rear Bumpers
20 inch Rigid light Bar; 4 Rigid ignites, 10k Smittybuilt Bumper
KC Flexera 4 Pillar lights
Monster Hooks Inc Swivel Hooks
Complete B&O replacement with kicker subs, speakers, amps and an axxess DSP
IAG Interior Lights
Tuffy (Ford) Deluxe Cargo Lid
Ford Tube Doors
JB4
Pedal Commander
UPR Catch Can
a few Vinyl accents

Next in line:
JTops Bimini
Intercooler
Down Pipes
Wait on a full tune!View attachment 6644View attachment 6645View attachment 6646View attachment 6647
Click to expand...
Hi M_Braptor, first off, bad ass ride!

I’m planning on doing the RPG collars and wondered if you went with an upgraded UCA as well? If not, how well did your Raptor align and any issues with angles with stock UCA?

Also debating between 37x13.50 vs 38x13.50
Is the performance and handling much different with the extra weight and rubber?

Thanks in advance for helping me out with some decisions.
 
  • Thread Starter
  • Thread starter
  • #4
TX Braptor said:
Hi M_Braptor, first off, bad ass ride!

I’m planning on doing the RPG collars and wondered if you went with an upgraded UCA as well? If not, how well did your Raptor align and any issues with angles with stock UCA?

Also debating between 37x13.50 vs 38x13.50
Is the performance and handling much different with the extra weight and rubber?

Thanks in advance for helping me out with some decisions.
Click to expand...
No issues aligning with the UCA’s. I have to tell you, that if you are looking at using collars, I would go with Foutz now that they have come out with their line. They designed their collars from the ground up based off of the Braptor vs repurposing off of the f150. They are true height collars, and will retain the factory rake or you can go smaller in the rear if you want to level it. If you do that with the rpg’s you will end up with a very small inverse rake to the rear. Their UCA’s will also work with a negative offset wheel, where with the RPG you have to be at zero.
In regards from 37s to 38s, there is some impact, but it’s very minimal with all of the torque it produces. I think the only way you would notice is if you were to drag race them, I’m sure the 37s would win by a few inches.
 
Foutz Collars thread below from in our Foutz Motorsports forum

www.broncoraptor.com

Bronco Raptor Front Leveling Kit

We received our new Bronco Raptor a few days ago and we already worked out the front Leveling kit. This will bring the front up so its level with the rear now. Pretty simple install just like our F150 Raptor kits. Thought you guys might like to see this...
www.broncoraptor.com www.broncoraptor.com
 
Those wheels are very nice. Love all the upgrades except the painter fender flares. Still think all painted flares look hideous.
 
B_Raptor,

Thanks for the info and appreciate the input about the collars. I was torn between Foutz vs RPG, so that def helped me make my decision. I’ll be ordering a set from Foutz this week and will post after installed. Now the fun (and misery) of countless hours looking at tire/wheel combos! 😁

PS the painted fenders ain’t so bad! IMO
 
  • Thread Starter
  • Thread starter
  • #8
TX Braptor said:
B_Raptor,

Thanks for the info and appreciate the input about the collars. I was torn between Foutz vs RPG, so that def helped me make my decision. I’ll be ordering a set from Foutz this week and will post after installed. Now the fun (and misery) of countless hours looking at tire/wheel combos! 😁

PS the painted fenders ain’t so bad! IMO
Click to expand...
Good luck with the tire/wheel selection!

I guess everyone is welcome to their own opinions, but I’m not really sure what the point of his was. I can tell you that I have gotten rave reviews on mine :). I look forward to seeing what you decide on!
 
M_Braptor said:
They are my go to shop!
Click to expand...
Hey M_Braptor, I live in Georgetown and was going to have my collars, etc..installed at Ford dealer. Would you recommend Round 2 to do the work instead? I assume they do tires/wheels, etc..also. Thanks
 
M_Braptor said:
Hi, I'm a new member and was invited over to share my build after a member saw it on another forum. Below are the details.
Build list.

RPG Perch Collar Lift - 1.5" front / 2.25" rear
38x13.50x17 TrailGrapplers
TIS 556 Wheels -12 offset
Rock Slide Engineering Steps
Body Guard Front and Rear Bumpers
20 inch Rigid light Bar; 4 Rigid ignites, 10k Smittybuilt Bumper
KC Flexera 4 Pillar lights
Monster Hooks Inc Swivel Hooks
Complete B&O replacement with kicker subs, speakers, amps and an axxess DSP
IAG Interior Lights
Tuffy (Ford) Deluxe Cargo Lid
Ford Tube Doors
JB4
Pedal Commander
UPR Catch Can
a few Vinyl accents

Next in line:
JTops Bimini
Intercooler
Down Pipes
Wait on a full tune!View attachment 6644View attachment 6645View attachment 6646View attachment 6647
Click to expand...
Nice ride man! Welcome
 
You must log in or register to reply here.

Top Member Reactions

Lethal Performance Foutz Motorsports

Active Topics

Sponsors

Foutz Motorsports
Back
Top