Wheel Locks - Gorilla Factory Style Bulge

[TurboS]

First, I don't like the looks of wheel locks as I prefer all the lug nuts or bolts to appear identical. However I've always hoped they are a thief deterrent and therefore I try to purchase locks that are as similiar in appearance as possible to the other lug nuts. I ordered the Ford accessories 5 wheel lock kit when I ordered my Bronco Raptor in hopes they would match closely in appearance to the Ford OEM lug nuts. The Ford, McGard, locks are a dealer installed accessory but I didn't have my dealer install.

So, I get my new Bronco Raptor home, I pull off one of the spare tire lug nuts, and of course the locks are about 1/4" longer that the Ford lug nuts, not even close to similar. So I ordered Gorilla Factory Style Buldge wheel lock kit which is the same length, ~1.62" long, as the Ford lug nuts vs the Ford McGard locks that are ~1.87" long. Ford kit was $99, Gorilla locks from Summit racing was half that. I think these look much better, I may purchase all Gorilla lug nuts later just so they are all Chrome. I have ran the Chrome Gorilla lug nuts and locks on my Wrangler thru 3 Michigan salt spraying winters and there isn't any signs of corrosion.

It's important to get the "Factory Style Bulge" as the mating surface to the wheels is a much greater area vs regular bulge lug nuts, thereby reducing wheel stress caused by extremely aggressive driving. Gorilla # 96641DX 14mm x 1.5

NOTE: Remember our Bronco Raptors have F-150 Raptor hubs, therefore studs are 14mm x 1.5 and wheel Torque is 150 ft-lbs.

Left to right: Ford lock kit, Ford wheel lug nut, Gorilla lock nut

Gorilla lock nut installed

For reference here is the matching Gorilla lug nuts (to the Gorilla locks as shown above) 14mm x 1.5 in the 13/16" socket size, same size as OEM

However, the diameter of the Gorilla locks where the socket fits is .900 in diameter, therefore these 14mm x 1.5 in the 7/8" socket size may match even better.

 

[SteelBronco]

This is great info albeit a little too late as I have already ordered the factory locking lugs nuts !!! Now seeing this though I am going to go ahead and order a couple of Gorilla nuts.....if that even sounds right.
Thanks again Turbo for this awesome info, I'll be putting it to good use!

 

[TurboS]

This is great info albeit a little too late as I have already ordered the factory locking lugs nuts !!! Now seeing this though I am going to go ahead and order a couple of Gorilla nuts.....if that even sounds right.
Thanks again Turbo for this awesome info, I'll be putting it to good use!

Your dealer may be able to cancel your order for factory Ford locks since they will arrive thru your dealers parts department separate from your Bronco Raptor.

 

[SteelBronco]

I thought about trying to cancel but I'll just write them off and keep them. I am working on your setup now. I really like the looks of them and they're one solid lug nut instead of being capped like the factory style. Thanks....

 

[SteelBronco]

So what I did, since I don't have my BR yet I was trying to piece together what all I needed. 5 Locking lug nuts (1 per wheel including spare) and 22 Regular lug nuts (5 per wheel including 2 for spare).
Well I did what anyone would and reached out to Gorilla Automotive to see if they could just make this up in a BR kit. To their surprise they thought they already had one thinking it was the same as the standard Bronco. They will be contacting me to let me know the details of a new kit for these BR's as soon as possible.
See what you started TurboS?? Lol

 

[TurboS]

This is great info albeit a little too late as I have already ordered the factory locking lugs nuts !!! Now seeing this though I am going to go ahead and order a couple of Gorilla nuts.....if that even sounds right.
Thanks again Turbo for this awesome info, I'll be putting it to good use!

I agree, I attempted to obtain info on the Ford locking lug nuts last March before we placed our orders to no avail. Since the Ford locks are specific to only the Bronco Raptor, being 14mm x 1.5 with 5 total locks I expected them to be the correct length.

So what I did, since I don't have my BR yet I was trying to piece together what all I needed. 5 Locking lug nuts (1 per wheel including spare) and 22 Regular lug nuts (5 per wheel including 2 for spare).
Well I did what anyone would and reached out to Gorilla Automotive to see if they could just make this up in a BR kit. To their surprise they thought they already had one thinking it was the same as the standard Bronco. They will be contacting me to let me know the details of a new kit for these BR's as soon as possible.
See what you started TurboS?? Lol

The Gorilla Locks I ordered part number "96641DX5" had the 5 locks, so they do already have the Bronco Raptor specific locks. However your correct in that they don't have a complete kit including the 22 lug nuts.
Is Gorilla assembling a kit using the "66147DX" 7/8" lug nuts or "61147CX" 13/16" lug nuts?
I think the 7/8" may look better however the 13/16" would allow the use of the Ford OEM supplied jack kit lug wrench.

 

[SteelBronco]

I did make mention of the 13/16 vs 7/8 and his response was he just stopped me right there. They would have to look into the requirements suitable for the application and go from there. So I said I understand but then having the option to choose either size would also be nice depending on what the consumer may want. Said he would pass it on! If/when I hear something I will let everyone know!

 

[slicktop]

First, I don't like the looks of wheel locks as I prefer all the lug nuts or bolts to appear identical. However I've always hoped they are a thief deterrent and therefore I try to purchase locks that are as similiar in appearance as possible to the other lug nuts. I ordered the Ford accessories 5 wheel lock kit when I ordered my Bronco Raptor in hopes they would match closely in appearance to the Ford OEM lug nuts. The Ford, McGard, locks are a dealer installed accessory but I didn't have my dealer install.

So, I get my new Bronco Raptor home, I pull off one of the spare tire lug nuts, and of course the locks are about 1/4" longer that the Ford lug nuts, not even close to similar. So I ordered Gorilla Factory Style Buldge wheel lock kit which is the same length, ~1.62" long, as the Ford lug nuts vs the Ford McGard locks that are ~1.87" long. Ford kit was $99, Gorilla locks from Summit racing was half that. I think these look much better, I may purchase all Gorilla lug nuts later just so they are all Chrome. I have ran the Chrome Gorilla lug nuts and locks on my Wrangler thru 3 Michigan salt spraying winters and there isn't any signs of corrosion.

It's important to get the "Factory Style Bulge" as the mating surface to the wheels is a much greater area vs regular bulge lug nuts, thereby reducing wheel stress caused by extremely aggressive driving. Gorilla # 96641DX 14mm x 1.5

NOTE: Remember our Bronco Raptors have F-150 Raptor hubs, therefore studs are 14mm x 1.5 and wheel Torque is 150 ft-lbs.

View attachment 2054

Left to right: Ford lock kit, Ford wheel nut, Gorilla lock nut
View attachment 2055
Gorilla lock nut installed
View attachment 2056
View attachment 2057

For reference here is the matching Gorilla lug nuts (to the Gorilla locks as shown above) 14mm x 1.5 in the 13/16" socket size, same size as OEM
View attachment 2058

However, the diameter of the Gorilla locks where the socket fits is .900 in diameter, therefore these 14mm x 1.5 in the 7/8" socket size may match even better.
View attachment 2059

I bought a vehicle that showed up with locks on all four wheel’s but no keys owner said was in tool kit but no. So a friend that has a high end detail shop had a (wheel lock extraction kit) had several sizes and removed all four in a few minutes. Like my dad use to say….locks are for honest people !!

 

[TurboS]

I bought a vehicle that showed up with locks on all four wheel’s but no keys owner said was in tool kit but no. So a friend that has a high end detail shop had a (wheel lock extraction kit) had several sizes and removed all four in a few minutes. Like my dad use to say….locks are for honest people !!

Agreed, it's more of making it a hassle for a thief encouraging them to move to a easier grab. The Spare is the easiest grab especially with 1/2 the nuts and they are only snug. In Detriot when the manufactures install locks the thiefs simply break the window and grab the key from the convenient designed storage location.

 

[Radarsdad]

Just picked up my 2025 Bronco Raptor and have started the accessorizing process. I saw your post and ordered the Gorilla locks you listed. I was wondering if anyone has experienced any issues with the key or locks when torquing the wheels to the required 150 lb-ft of torque. The key wall looks kinda thin so I was wondering if anyone has had a key slip on the lock grooves when installing or removing the locks. Last thing I want is to have a flat in the boonies and not be able to change the tire. Thanks in advance for any input.

 

[TurboS]

Welcome to BroncoRaptor.com and congratulations on your new Raptor, one of the best on and off road driving vehicles ever.

I’ve used these Gorilla brand locks for years on numerous trucks, with hand and impact wrenches without issue. Excellent quality, I wouldn’t expect any problems when used as intended.

 

[jeffreybehr]

First, I don't like the looks of wheel locks as I prefer all the lug nuts or bolts to appear identical. However I've always hoped they are a thief deterrent and therefore I try to purchase locks that are as similiar in appearance as possible to the other lug nuts. I ordered the Ford accessories 5 wheel lock kit when I ordered my Bronco Raptor in hopes they would match closely in appearance to the Ford OEM lug nuts. The Ford, McGard, locks are a dealer installed accessory but I didn't have my dealer install.

So, I get my new Bronco Raptor home, I pull off one of the spare tire lug nuts, and of course the locks are about 1/4" longer that the Ford lug nuts, not even close to similar. So I ordered Gorilla Factory Style Buldge wheel lock kit which is the same length, ~1.62" long, as the Ford lug nuts vs the Ford McGard locks that are ~1.87" long. Ford kit was $99, Gorilla locks from Summit racing was half that. I think these look much better, I may purchase all Gorilla lug nuts later just so they are all Chrome. I have ran the Chrome Gorilla lug nuts and locks on my Wrangler thru 3 Michigan salt spraying winters and there isn't any signs of corrosion.

It's important to get the "Factory Style Bulge" as the mating surface to the wheels is a much greater area vs regular bulge lug nuts, thereby reducing wheel stress caused by extremely aggressive driving. Gorilla # 96641DX 14mm x 1.5

NOTE: Remember our Bronco Raptors have F-150 Raptor hubs, therefore studs are 14mm x 1.5 and wheel Torque is 150 ft-lbs.



Left to right: Ford lock kit, Ford wheel nut, Gorilla lock nut

Gorilla lock nut installed
View attachment 2056


For reference here is the matching Gorilla lug nuts (to the Gorilla locks as shown above) 14mm x 1.5 in the 13/16" socket size, same size as OEM

However, the diameter of the Gorilla locks where the socket fits is .900 in diameter, therefore these 14mm x 1.5 in the 7/8" socket size may match even better.

How the hell did U EVER get your wheels so clean??????????????????????????????

 

[Radarsdad]

Welcome to BroncoRaptor.com and congratulations on your new Raptor, one of the best on and off road driving vehicles ever.

I’ve used these Gorilla brand locks for years on numerous trucks, with hand and impact wrenches without issue. Excellent quality, I wouldn’t expect any problems when used as intended.

Good to know. Thank you for your input!

 

[Apache8]

@TurboS Thank you for the info! Picked up my new rig last week and need to address locks like you did.

I've had all lugs as locks on 3 Hellcats and a 392 Rubicon...always great product.

Was just in touch with Gorilla and they said 3/4" Hex 12 x 1.5, no full lock sets. Said would need to buy 4 or 5 packs and would have different keys. Disappointing that both the rep and the website say 12 x 1.5 when Bronco Raptor product is requested.

I'll end up getting a 4 pack and use 3 on my spare then get another 4 pack and Gorilla lugs for the wheels on the ground.

Question: Do you still like the 7/8 over the 13/16? I like the idea of using the OEM jack lug wrench but if there is a noticeable improvement using 7/8 I'd go that route.

I will post an introduction thread as soon as I get a few pics of my ride.
Again, thank you for your initial post back in 2022!
It continues to help folks like me avoid experiencing an issue.

 

[TurboS]

@TurboS Thank you for the info! Picked up my new rig last week and need to address locks like you did.

I've had all lugs as locks on 3 Hellcats and a 392 Rubicon...always great product.

Was just in touch with Gorilla and they said 3/4" Hex 12 x 1.5, no full lock sets. Said would need to buy 4 or 5 packs and would have different keys. Disappointing that both the rep and the website say 12 x 1.5 when Bronco Raptor product is requested.

I'll end up getting a 4 pack and use 3 on my spare then get another 4 pack and Gorilla lugs for the wheels on the ground.

Question: Do you still like the 7/8 over the 13/16? I like the idea of using the OEM jack lug wrench but if there is a noticeable improvement using 7/8 I'd go that route.

I will post an introduction thread as soon as I get a few pics of my ride.
Again, thank you for your initial post back in 2022!
It continues to help folks like me avoid experiencing an issue.

Welcome to BroncoRaptor.com! and your welcome. The 7/8 vs 13/16 is preference, I try to have the same size for the lug nuts and the lock key but not that's not always possible.

Note, Bronco's have 12mm x 1.5, Bronco Raptors have 14mm x 1.5 studs. Below copied from above:
"NOTE: Remember our Bronco Raptors have F-150 Raptor hubs, therefore studs are 14mm x 1.5 and wheel Torque is 150 ft-lbs."

 

[Apache8]

Welcome to BroncoRaptor.com! and your welcome. The 7/8 vs 13/16 is preference, I try to have the same size for the lug nuts and the lock key but not that's not always possible.

Note, Bronco's have 12mm x 1.5, Bronco Raptors have 14mm x 1.5 studs. Below copied from above:
"NOTE: Remember our Bronco Raptors have F-150 Raptor hubs, therefore studs are 14mm x 1.5 and wheel Torque is 150 ft-lbs."

Thanks for the welcome, TurboS!
The Gorilla customer rep asked that I check with my dealership regarding size as their resources say 12mm. I did the follow up and confirmed 14mm...he said they don't offer it in 12mm but he could get me a full set of 27 locks keyed alike in 14 x 1.5

I ordered the 27 locks and 2 keys. Will report back my observations when they arrive and are mounted up.

I know nothing stops a skilled thief with tools and time but I will always be a hard target. She isn't left outside at home or overnight in public so 27 locks should slow a scummer down.