39 to 40 Inch Tires for the Bronco Raptor

[TurboS]

40's with Eibach Pro-Lift-Kit in below video by TCcustoms:

TRYING to fit 40's on a Bronco Raptor! I have a problem! - By TCcustoms

8 minute review video including Eibach Pro-Lift-Kit install, 40's, ride quality, and zero to 60 times before and after. "Today we are installing the Eibach Coil Spring Lift kit to hopefully fit 40 inch tires on Mitchells Bronco Raptor! We headed to TCcustoms in Pell City to get this lift kit on...

www.broncoraptor.com

 

[Birdman37]

Plenty of room Eibach pro lift springs and 39/12.50/17

 

[Dewars]

I wrestled with what size lift and tire. Decided 40s were just too much and went 38x13.5.

Glad I did. Still have power- stopping and going and they don’t look too big to be useful. I bet the Nittos are very close in size to the BFG 39

2.5/2 FMI perch collars

 

[jbattahoe]

Plenty of room Eibach pro lift springs and 39/12.50/17
View attachment 15139

Did you get new wheels? or direct fit on factory wheels? I'm getting the Eibach lift this week and want to put on Ko3 39 inch. But they say to do 0 offset with new wheels????

 

[jbattahoe]

Did you get new wheels? or direct fit on factory wheels? I'm getting the Eibach lift this week and want to put on Ko3 39 inch. But they say to do 0 offset with new wheels????

Thank you. Should I stay with the stock wheels? or go for 17x8.5 or9 with 0 offset? 4.75 backspace for the 39's? Or go to a 18 inch rim 18x9 0 offset with KO3's 40x13.5x18? This is a $5000 dollar question lol. Have to order it online. I live in BFG........Thanks for the help!!!!!

 

[TurboS]

Did you get new wheels? or direct fit on factory wheels? I'm getting the Eibach lift this week and want to put on Ko3 39 inch. But they say to do 0 offset with new wheels????

@Birdman37 is running OEM stock Bronco Raptor wheels, note that the tires are the same 12.50 section width as our OEM tires. With the BFG 39x13.5-17 you should be fine with the OEM wheels, if there is a slight touch at full turn then add 3/8" or 3/4" Bora wheel spacers.
Aftermarket wheels do not need to be 0 offset, I would recommend a +25mm to +6 mm positive offset in a 17x9 or 17x8.5 wheel.